HAT-100 Cross Hatch Adhesion Tester

1.Six working side blades 2.Multi-cutting blades spacing 3.fast dilivery

This instrument is widely used to evaluate the adhesion of various coatings .A high precise machined wheel presenting 6 or 11 cutting blades with various spacing is mounted in a handle. The test is carried out by performing 2 series of crossed cuts at right angle. The obtained lattices is either brushed or cleared with adhesion tape. According to the coatings thickness and the related spacing, the results can be classified with reference to a standard scale. It has long life tool with 6 cutting edges and comfortable wood handle.

When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.    

The Cross Hatch Cutters conform with the requirements of:BS 3900 E6;BS/EN ISO 2409;ASTM D 3359 D 3302;GB/T 9286

Main Technical Parameters

 Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to rotate it to achieve a new blade. Multi-cutting blades spacing:1mm/2mm/3mm

The number of square:25squares/100squares

Normal Packing List

         Carrying case

         Cross Hatch Cutter & Handle

  1 roll of 3M Scotch Transparent Tape

  Brush

  Magnifier

 Ordering information

Cross Hatch ]adhesion tester,11 blades, spacing 1mm(coating thickness 0-60µm)